Log Into Your Account | Request one here

Drain Pan

 

Standard Features:
· 18ga. G90 min. construction.
· Seam welded corners
· 5-7° light V-break or X-break to drain center.
· Male nipple or female coupling factory welded on.

Optional Features:
1. Heavy gauge galvanized steel
2. .080 Aluminum construction.
3. 18ga. Stainless Steel, 304-2B construction.

Note:
· Pan dimensions are inside (I.D.) & the outside grows 2 times the material thickness. If outside dimensions are desired to be maintained, this must be specified.
· Sizes greater than 54″ in width & 114″ in length are split & seam welded together, 16ga. min. suggested thickness. Warping may occur at the seam welds. The thinner the material the greater chance of warping.

Standard Features

  • 18ga. G90 min. construction.
  • Seam welded corners
  • 5-7° light V-break or X-break to drain center.
  • Male nipple or female coupling factory welded on.

Optional Features

  • Heavy Gauge galvanized steel (specify)
  • .080 Aluminum construction.
  • 18ga. Stainless Steel, 304-2B construction